分类
classification
从安装上又可分为内置式和外置式。内置式电动窗帘看不到电机，从表面看只有轨道（原理和电动轨道汽车差不多，电机在轨道里面跑动，市面上相当少；外置式顾名思义电机裸露在外面。
From the installation can be divided into built-in type and external type. The built-in electric curtain can not see the motor, from the surface, only the track (the principle is similar to the electric rail car, the motor runs inside the track, quite few on the market; the external type, as the name implies, the motor is exposed outside.
电动窗帘，根据操作机构和装饰效果的不同分为电动开合帘系列、电动升降帘系列、电动天棚帘(户外电动天蓬和室内电动天棚)、电动遮阳板、电动遮阳蓬等系列，具体如百叶帘、卷帘、罗马帘、柔纱帘、风情帘、蜂巢帘等。
According to the different operating mechanism and decoration effect, electric curtain can be divided into electric opening and closing curtain series, electric lifting curtain series, electric ceiling curtain (outdoor electric canopy and indoor electric ceiling), electric sunshade, electric sunshade and other series, such as blinds, rolling blinds, Roman blinds, soft gauze curtains, custom curtains, honeycomb curtains, etc.
从形式上可分为：电动开合帘、电动卷帘、电动百叶帘、户外遮阳蓬、户外百叶帘、户外遮阳板、中空百叶帘、全或半遮光引导轨卷帘。
From the form, it can be divided into: electric shutter, electric shutter, outdoor sunshade, outdoor shutter, outdoor sunshade, hollow shutter, full or semi shading guide rail roller shutter.
室内天蓬帘有根据现场安装环境及驱动方式不同可划分为：佳丽斯天棚（面料不同还有其他说法），FTS，FCS，FSS等。
According to the different installation environment and driving mode, the indoor canopy curtain can be divided into: jialisi ceiling (there are other words for different fabrics), FTS, FCS, FSS, etc.
电动开合帘电机分类：电动开合布帘系统包括轨道系统、控制系统和装饰布帘，2011年以来生产的产品轨道系统 采用的驱动方式有直流电机驱动、交流电机驱动和电磁驱动等方式。
Classification of electric curtain opening and closing motor: the electric curtain opening and closing system includes track system, control system and decorative curtain. The track system of products produced since 2011 adopts DC motor drive, AC motor drive and electromagnetic drive.
直流电机一般采用内置或外置电源变压器，安全低能耗，运作时间长电机也不发热，为国际标准。且驱动功率一般较大，能负载的布帘可以达到40-100公斤，噪音比较小，特别是负载后比空转声音更小，另外其控制电路比较简单，一般都是内置接收器，不需要单独外接接收器。交流电机驱动方式可直接使用220V电源，控制电路比较复杂，一般都需外接接收器，且不太安全；虽驱动功率较大，但电机容易发热而影响使用寿命。
DC motor generally adopts built-in or external power transformer, which is safe, low-energy consumption, long operation time and no heating of motor, which is an international standard. In addition, the control circuit is relatively simple. Generally, the built-in receiver does not need to be connected to an external receiver. AC motor drive mode can directly use 220 V power supply, the control circuit is more complex, generally need external receiver, and not very safe; although the drive power is large, but the motor is easy to heat and affect the service life.